بازرگانی پیمان الکتریک نماینده فروش انواع انکودر، روتاری انکودر، انکودر هالو شفت، heavy duty ،sendix based و انکودر سینوسی و کسینوسی kuebler آلمان
برخی از کدهای قابل ارائه انکودر kuebler آلمان به حضورتان معرفی می گردد:
Kubler Multiturn Encoder
Sendix F3663/F3683 (Shaft/Hollow Shaft) SSI/BiSS-C Compact Optical
The Sendix F36 multiturn with the patented Intelligent Scan Technology is an optical multiturn encoder in miniature format, without gears and with 100% insensitivity to magnetic fields. With a size of just 36 x 42 mm it offers a through hollow shaft of up to 8 mm or a blind hollow shaft of up to 10 mm.
• Sturdy bearing construction in Safety Lock Design for resistance against vibration and installation errors
• Reduced number of components ensures magnetic insensitivity
• IP67 protection and wide temperature range -40°C to +90°C
• Patented Intelligent Scan Technology with all singleturn and multiturn functions on one single OptoAsic - highest reliability, high resolution up to 41 bits, 100% magnetic field insensitiveness
• High precision with data refresh rate of the position value = 1µs
• High resolution feedback in real-time via incremental outputs SinCos and RS422
• Short control cycles, clock frequency with SSI up to 2 MHz / with BiSS-C up to 10 MHz
If you are looking for Kubler Multiturn Encoder, please call us we will do our best to help you find the Kubler F3663/F3683 Shaft/Hollow Shaft SSI/BiSS-C Encoder that you are looking for at the most competitive prices possible. If you are searching for Kubler F3668/F3688 Shaft/Hollow Shaft CANopen Encoder technical information (data-sheets) please use the datasheets or product selection guide page links.
Sendix F3668/F3688 (Shaft/Hollow Shaft) CANopen Compact Optical
The Sendix F36 multiturn with the patented Intelligent Scan Technology is an optical multiturn encoder in miniature format, without gears and with 100% insensitivity to magnetic fields. With a size of just 36 x 42 mm it offers a shaft or a blind hollow shaft of up to 10 mm.
• Sturdy bearing construction in Safety Lock Design for resistance against vibration and installation errors
• Reduced number of components ensures magnetic insensitivity
• Ideal for use outdoors thanks to IP67 protection and wide temperature range from -40°C up to +85°C
• Patented Intelligent Scan Technology with all singleturn and multiturn functions on one single OptoAsic - offering highest reliability, a high resolution up to 41 bits and 100% magnetic field insensitiveness
• CANopen with current encoder profile
• LSS services for configuration of the node address and baud rate
• Variable PDO mapping in the memory
Sendix 5863 SIL/5883 SIL (Shaft/Hollow Shaft) SSI/BiSS-C + SinCos Functional Safety Optical
The absolute multiturn encoders Sendix 5863 SIL and 5883 SIL are perfectly suited for use in safety-related applications up to SIL3 according to DIN EN ISO 61800-5-2 or PLe to DIN EN ISO 13849. The extra strong Safety-Lock Design interlocked bearings, the high integration density of the components based on OptoASIC technology and the rugged die-cast housing make these devices ideal also for demanding applications outdoors.
• Certified by the BGIA - Institute for Occupational Safety and Health
• Suitable for SIL3 applications acc. to DIN EN ISO 61800-5-2
• Suitable for PLe applications acc. to DIN EN ISO 13849
• SSI or BiSS-C interface with incremental SinCos tracks
• Shaft and hollow shaft versions
• Cable and connector variants
• Various mounting options available
Sendix F5863/F5883 (Shaft/Hollow Shaft) SSI/BiSS-C Standard Optical Electronical
The Sendix F58 Multiturn with patented Intelligent Scan Technology is a particularly high resolution optical multiturn encoder without gears and with 100 percent magnetic insensitivity. 41 bits total resolution, through hollow shaft up to 15 mm and versions with additional SinCos or RS422 incremental track.
• Sturdy bearing construction in Safety Lock Design for resistance against vibration and installation errors
• Ideal for use outdoors thanks to IP67 protection and wide temperature range from -40°C up to +85°C
• Patented Intelligent Scan Technology with all singleturn and multiturn functions on one single OptoASIC - offering the highest reliability, a high resolution up to 41 bits and 100% magnetic field insensitivity.
• Available with SSI or BiSS-C interface and combined with SinCos incremental signals
• The right fixing solution or type of connection available for every application
• SET button and LED for simple start-up
• High resolution feedback in real-time via incremental outputs SinCos and RS422
• Short control cycles, clock frequency with SSI up to 2 MHz / with BiSS-C up to 10 MHz
Sendix F5868/F5888 (Shaft/Hollow Shaft) CANopen Standard Optical Electronical
The Sendix F58 Multiturn with patented Intelligent Scan Technology is a particularly high resolution optical multiturn encoder without gears and with 100 percent magnetic insensitivity. 32 bits total resolution, through hollow shaft up to 15 mm and CANopen functionalities according to up-to-date Encoder Profile.
• Sturdy bearing construction in Safety Lock Design for resistance against vibration and installation errors
• Ideal for use outdoors thanks to IP67 protection and wide temperature range from -40°C up to +80°C
• Patented Intelligent Scan Technology with all singleturn and multiturn functions on one single OptoASIC - offering the highest reliability, a high resolution up to 32 bits and 100% magnetic field insensitivity.
• CANopen with current encoder profile
• LSS services for configuration of the node address and baud rate
• Variable PDO mapping in the memory
• Universal Scaling Function
• 32 bits total resolution (16 bit MT + 16 bit ST)
Sendix 5863/5883 (Shaft/Hollow Shaft) SSI/BiSS-C Standard Optical
The Sendix 5863 and 5883 multiturn encoders with SSI or BiSS-C interface and optical sensor technology can achieve a resolution of max. 29 bits. A through hollow shaft up to 14 mm and a blind hollow shaft up to 15 mm are available, as well as versions with additional SinCos or RS422 incremental track.
• Tried-and-tested in applications with the highest demands, such as in wind energy or mobile automation
• Absolutely reliable operation in areas with strong magnetic fields, thanks to mechanical gear with optical sensor technology
• Rugged die-cast housing, remains sealed even in harsh everyday use
• -40°C up to +90°C: use in wide temperature range. Protection IP67
• Available with SSI or BiSS-C interface and combined with SinCos incremental signals
• The right fixing solution or type of connection available for every application.
• SET button and LED for simple start-up
5862/5882 (Shaft/Hollow Shaft) SSI/RS485 Programmable Standard Optical/Magnetic
The Sendix multiturn encoders 5862 and 5882, with SSI or RS485 interface and combined optical and magnetic sensor technology, offer a maximum resolution of 25 bits. These encoders are programmable via the Ezturn software. The hollow shaft version boasts a minimal installation depth, facilitating use where space is tight.
• Hollow shaft version with just 43 mm installation depth
• Hollow shaft version up to 12 mm diameter
• With SSI or RS485 interface
• Programmable via Ezturn
• Numerous connection options due to wide range of connection types
Sendix 5868/5888 (Shaft/Hollow Shaft) Profibus-DP Standard Optical
The multiturn encoders 5868 and 5888 with Profibus interface and optical sensor technology are the ideal solution for all Profibus applications. With a maximum resolution of 28 bits these encoders are available with blind hollow shaft up to 15 mm.
• Tried-and-tested in applications with the highest demands, such as in wind energy or mobile automation.
• Absolutely reliable operation in areas with strong magnetic fields, thanks to mechanical gear with optical sensor technology
• Fast, simple, error-free connection using versions with M12 connector
• Wide-ranging programming options thanks to latest encoder profile
Sendix 5868/5888 (Shaft/Hollow Shaft) CANopen/CANlift Standard Optical
The Sendix multiturn encoders 5868 and 5888 with CANopen or CANlift interface and optical sensor technology are the right encoders for all CANopen or CANlift applications. With a maximum resolution of 28 bits these encoders offer an optional additional RS422 incremental track with 2048 pulses.
• Tried-and-tested in applications with the highest demands, such as in mobile automation or medical technology.
• Ideal for use outdoors thanks to IP67 protection and wide temperature range from -40°C up to +80°C
• Node address can be set via rotary switches or software
• Baud rate and termination can be set via DIP switches or software
• With bus terminal cover or fixed connection, as well as M12 connectors or cable connection
Sendix 5868/5888 (Shaft/Hollow Shaft) EtherCAT Standard Optical with Drive
The multiturn encoders 5868 and 5888 with second-generation EtherCAT interface and optical sensor technology are ideal for use in all applications with an EtherCAT interface. The data communication is based on CAN over EtherNet and ideally suited for use in real time applications. These encoders are available with a solid shaft up to a maximum of 10 mm or a blind hollow shaft up to 15 mm.
• EtherCAT conformance tested
• Integration of the latest Slave - EtherCAT stack from Beckhoff, Version 5.01
• Ideally suited for use in harsh outdoor environments, thanks to IP67 protection and rugged housing construction
• Use of CoE (CAN over EtherNet)
• Genuine new position information as a result of minimal cycle time of 62.5 µs in the DC mode
• Faster, easier error-free connection thanks to M12 connectors
Sendix 5868/5888 (Shaft/Hollow Shaft) PROFINET Standard Optical Mechanical
The multiturn encoders 5868 and 5888 with PROFINET interface and optical sensor technology are ideal for use in all applications with a PROFINET interface. The encoder supports the isochronous (IRT) mode and is therefore ideal for real-time applications. Easy start-up thanks to the "Ezturn for PROFINET" software supplied with the encoder.
• Ideally suited for all PROFINET applications thanks to the use of encoder profile 4.1
• Perfect for use in harsh outdoor environments, as a result of IP67 protection and rugged housing construction
• IRT-Mode
• Cycle time = 1 ms
• Firmware updater allows for easy expansion of characteristics without having to disassemble the encoder.
• Faster, easier error-free connection thanks to M12 connectors
5860 (Shaft/Hollow Shaft) DeviceNet Standard Optical/Magnetic
The multiturn encoder 5860 with DeviceNet interface and combined optical/magnetic sensor technology is the right solution for all applications in DeviceNet networks. These encoders are available with a solid shaft up to max. 10 mm diameter or a blind hollow shaft up to 15 mm.
• Variants with shaft or blind hollow shaft
• Programmable via Bus
• M12 connector
• Programmability of all relevant parameters
9080 (Large Hollow Shaft) Profibus-DP Standard Optical/Magnetic
The multiturn encoder 9080 with Profibus interface and combined optical / mechanical sensor technology is perfect for Profibus applications, where a large hollow shaft is required. This through hollow shaft is available with a diameter up to 28 mm. The maximum resolution of the 9080 is 25 bits.
• With cable gland or M12 connector
• Hollow shaft of 12 up to 28 mm
• Programmable over the bus
• All relevant parameters programmable
• Wide selection of shafts and fixing options
9080 (Large Hollow Shaft) CANopen/DeviceNet Standard Optical/Magnetic
The multiturn encoder 9080 with CANopen interface and combined optical / mechanical sensor technology is perfect for CANopen applications, where a large hollow shaft is required. This through hollow shaft is available with a diameter up to 28 mm. The maximum resolution of the 9080 is 25 bits.
• With cable gland or M12 connector
• Hollow shaft of 12 up to 28 mm
• Programmable over the bus
• All relevant parameters programmable
• Wide selection of shafts and fixing options
9081 (Large Hollow Shaft) SSI/RS485 Standard Optical/Magnetic Programmable
The multiturn encoder 9081, with SSI interface and combined optical / mechanical sensor technology, is also available with additional incremental track or RS485 interface. This encoder has a through hollow shaft with a diameter up to 28 mm and offers resolutions up to 25 bits.
• Hollow shaft up to max. 28 mm with an installation depth of just 47 mm
• Outer diameter 90 mm
• Various torque stops available
• Large selection of hollow shafts, interfaces and resolutions
Sendix 7063 (Shaft) SSI/BiSS-C ATEX Optical
The Sendix 7063 absolute multiturn encoders offer Ex protection in a compact 70 mm seawater resistant housing, with an SSI or BiSS-C interface and optical sensor technology. These shock and vibration-resistant encoders operate flexibly with a resolution of up to 29 bits; they are also available with axial and radial cable outlets.
• "Flameproof-enclosure" version: approved for zone 1, 2 and 21, 22
• Can be operated in marine environments - housing and flange manufactured from seawater-resistant aluminium
• Remains sealed even in harsh everyday use and ensures highest safety against field breakdowns. IP67 protection
• Can be used even when space is tight
• Minimal installation depth, diameter 70 mm
• Compact cable outlet axial or radial
Sendix 7068 (Shaft) Profibus-DP ATEX Optical
The Sendix 7068 absolute multiturn encoders offer Ex protection in a compact 70 mm seawater resistant housing, with a Profibus interface and optical sensor technology. These shock and vibration-resistant encoders operate flexibly with a resolution of up to 28 bits; they are also available with axial and radial cable outlets.
• "Flameproof-enclosure" version: approved for zone 1, 2 and 21, 22
• Can be operated in marine environments - housing and flange manufactured from seawater-resistant aluminium
• Remains sealed even in harsh everyday use and ensures highest safety against field breakdowns. IP67 protection
• Can be used even when space is tight
• Minimal installation depth, diameter 70 mm
• Compact cable outlet axial or radial
Sendix 7068 (Shaft) CANopen ATEX Optical
The Sendix 7068 absolute multiturn encoders offer Ex protection in a compact 70 mm seawater resistant housing, with a CANopen interface and optical sensor technology. These shock and vibration-resistant encoders operate flexibly with a resolution of up to 28 bits; they are also available with axial and radial cable outlets.
• "Flameproof-enclosure" version: approved for zone 1, 2 and 21, 22
• Can be operated in marine environments - housing and flange manufactured from seawater-resistant aluminium
• Remains sealed even in harsh everyday use and ensures highest safety against field breakdowns. IP67 protection
• Can be used even when space is tight
• Minimal installation depth, diameter 70 mm
• Compact cable outlet axial or radial
Sendix 7063 SIL (Shaft) SSI/BiSS-C + SinCos ATEX Optical
Ex protection and Functional Safety in one device. The absolute multiturn encoders Sendix 7063 SIL are perfectly suited for use in safety-related applications up to SIL3 according to DIN EN ISO 61800-5-2 or PLe to DIN EN ISO 13849. In addition, these devices ensure Ex protection in a compact 70 mm housing out of seawater-resistant aluminium.
• Certified by the German Institute for Occupational Safety (IFA)
• Suitable for SIL3 applications acc. to DIN EN ISO 61800-5-2
• Suitable for PLe applications acc. to DIN EN ISO 13849
• SSI or BiSS-C interface with incremental SinCos tracks
• "Flameproof-enclosure" version: approved for zone 1, 2 and 21, 22
Our industrial factory automation supplies distributors warehouse in Boise, Idaho stocks some TURCK Kuebler products enabling us to further assist you in finding the correct Sendix 5863 SIL/5883 SIL encoder for your application in the Pacific Northwest USA. We can proudly say that we carry more Sendix F5863/F5883 encoders in stock than any other TURCK distributors in the Pacific Northwest region. Whether we have Sendix F5868/F5888 encoder in stock in Boise, Idaho or need to get them from TURCK; Clearwater Tech can get Sendix 5863/5883 to you fast and save money!
It will be very helpful if you have the Type 5862/5882 encoder part numbers ready, then our sales representatives can provide you with a pricing and availability quote for Sendix 5868/5888 Profibus-DP encoder that you are looking for in seconds. If you do not have the part numbers for Sendix 5868/5888 CANopen/CANlift encoder, our application engineers will be able to help you figure out the part numbers and get the price quote to you as soon as possible.
جهت کسب اطلاعات بیشتر به وبسایت پیمان الکتریک مراجعه فرمایید:
www.peymanelectric.com
و یا جهت مشاهده کاتالوگ اینجا کلیک نمایید
شماره تماس: 02133993055 / 02133993009
شماره فکس: 02136057593
آدرس: تهران لاله زار جنوبی کوچه بوشهری مجتمع تجاری تهران الکتریک طبقه اول واحد 203
همراه ما در کانال تلگرام باشید:
https://telegram.me/Peymanelcco